automatic forging line

Automatic Closed die Forging Line

CNC closde die forging hammer

CNC Hydraulic Die Forging Hammers

cnc forging hammer power head


Anyang CNC hydraulic forging hammer
  • Our company exclusively drafted China National manufacturing standard of CNC Hydraulic Die Forging Hammer.
  • Our technical center is the China National Research center of CNC Hydraulic Die Forging Hammer.
  • Our Forging Hammers have been exported to Germany, USA, Russia, Romania, Slovenia, South Africa, Egypt, Brazil, India, Vietnam etc over 60 countries.


CNC forging hammer Q&A

CNC forging hammer issues and resolve
Problem: system fault of ejection
Reason: ①approach switch of hammer head is not work. ②magnetic valve of ejection part is blocked.
Resolve: ①right connection. Check whether approach switch loose or fault. ②Check, change.
please contact More

The Safety Rules Of CNC Die Forging Hammer

The check before start hammer
1) Check the easy to loose bolts, if loose, tighten immediately.
2) Check the guide rails of hammer body, if don't have lubricating oil, start the lubrication pump to supply oil. If there is no oil in the lubrication pump, fill oil immediately.
3) Check the pressure accumulator with special tools (regular), if have leak, recharge immediately.
4) Check the pipes have oil leak or not, if any, solve it immediately.
5) Check hose whether damaged or not, if damaged, replace it immediately.
6) Check the fire fighting system that matching the hammer, if damaged, replace immediately.
7) Check the lighting throughout the production line, if damaged, replace it immediately.
8) Check the air pressure, if the pressure is low, adjust it immediately.
9) Check the cooling water get through or not, if not, open immediately.
10) Check the valve on the cooling oil road, all of them should be opened.
11) Ensure the work area that around the hammer is clean and tidy.... More

        2001-2019 All Rights Reserved by Anyang Forging Press ( Group) Machinery Industry Co.,Ltd.   Site Index | Product Index